Slow Progress
|
04 January 2009 |
The Prop Has Landed
|
16 December 2008 |
Engine Arrived
|
08 December 2008 |
Engine Coming Home
|
30 November 2008 |
Engine Update
|
19 November 2008 |
Mag Timing Reset
|
30 June 2008 |
Flywheel Problem Fixed, But Still No Start:(
|
25 June 2008 |
Engine Start - Good News, Bad News
|
23 June 2008 |
Ignition Problem Solved
|
16 June 2008 |
Ignition Snag, Baffle Gotcha
|
15 June 2008 |
Almost Ready for Engine Start
|
14 June 2008 |
Internal Engine Inspection - Picture, etc
|
11 June 2008 |
Internal Engine Inspection - A OK!!
|
11 June 2008 |
Getting ready to pull cylinders
|
08 June 2008 |
Today's Lesson - Short Cuts
|
30 September 2007 |
Alternator Belt Tension
|
14 July 2007 |
Drain Hoses and Oil Pressure Line
|
14 June 2007 |
Ignition Coil Mount
|
22 April 2007 |
New Inverted Oil System Separator Tank
|
18 February 2007 |
Tim the Tool Man Strikes Again
|
28 January 2007 |
Misc Update
|
01 October 2006 |
Busy Travel Period
|
06 May 2006 |
Spinner Spacers
|
12 June 2005 |
RV Fly-In, Alternator Installation
|
05 June 2005 |
Oil Cooler Door - Working
|
29 May 2005 |
IO-360-A Power Chart Available
|
25 July 2004 |
Alternate Air Door, again
|
13 June 2004 |
Alternate air door pictures
|
16 May 2004 |
Rounding the hole in the induction air snorkel
|
01 July 2003 |
Request for in-flight engine power data
|
14 January 2003 |
Franklin engine installation pictures
|
05 January 2003 |
Oil cooler hoses
|
05 January 2003 |
Oil Cooler Fittings
|
04 January 2003 |
IO-360A and O-360 Power Spreadsheets
|
03 January 2003 |
Oil cooler - slow progress
|
15 December 2002 |
Oil cooler mount bottom
|
08 December 2002 |
Oil cooler air door
|
07 December 2002 |
Oil cooler mount - second iteration
|
01 December 2002 |
Oil cooler mount
|
30 November 2002 |
More oil cooler mount
|
27 November 2002 |
Oil cooler mount
|
24 November 2002 |
Baffle right front piece
|
19 November 2002 |
Baffle left front piece
|
16 November 2002 |
Hole in baffle floor for air filter
|
11 November 2002 |
Gap filled at snorkel flange
|
10 November 2002 |
Improving the fit of the snorkel to the fuel injection servo
|
09 November 2002 |
Fibreglasing the snorkel
|
02 November 2002 |
Induction Air for IO-360A
|
29 October 2002 |
Baffles, induction air
|
27 October 2002 |
Blasted baffles
|
24 October 2002 |